Free Shipping to the Lower 48 States
- Case of 12 (24oz) Cans Extreme Spray Foam
- HT-770 Pro Spray Foam Gun
- 1 (12oz) Can Gun Cleaner
- 1 Can Extreme Spray Foam covers 1,044 linear feet at 1/2" thick bead
Handi-Foam® low pressure one-component polyurethane spray foam insulation is moisture cured and designed to completely fill and seal small gaps, cracks and voids. Compared to standard cartridge type sealants, our polyurethane foam sealants have excellent adhesion and expansion characteristics ensuring a complete and permanent air tight seal. Polyurethane foam sealants result in less waste on small jobs while having an economic impact on large jobs. The polyurethane foam sealants offered by ICP Adhesives & Sealants, Inc. (ICP) are packaged in pre-pressurized aerosol cans and cylinders designed to be dispensed with a straw applicator or a professional dispensing tool.
Spray Foam Applications:
Used to fill and seal around gaps and penetrations in the building envelope to stop air infiltration. Specifically designed for use in extreme temperatures and low humidity conditions. Application areas: rim joists, attics, crawls spaces, basements, top plates, cracks, crevices, beneath base plates, mud sills, corner joints, exterior cracks, around utility panels, pipes and duct penetrations, etc.
- Sealing insulation board joints
- Sealing electrical outlets
- Sealing electrical openings
- Sealing through stud penetrations
- Sealing base-plates
- Sealing plumbing penetrations
- Sealing can lights
- Air sealing attic
- Sealing exterior gaps for pest control
Spray Foam Usage:
Optimal product temperature is 65-80◦ F (18-27◦ C). Attach the can to the dispensing unit (Handi-Tool®), shake well, and begin dispensing. The dispensing units can be metered by pulling the dispensing unit trigger for the desired rate, or with the metering screw located in the back. Foam application can be interrupted when needed as outlined in the instructions and the dispensing unit will be ready for immediate re-use, as long as it remains attached to a pressurized container. An empty gun foam container must be replaced with a new container. Shelf life is 15 months (expiration date located on the bottom of the container).
PPE (Personal Protective Equipment):
Use only in a well-ventilated area. Wear protective glasses with side shields or goggles, nitrile gloves, and clothing that protects against dermal exposure. Read all instructions and safety information prior to use. Consult the product’s SDS and TDS.
GREENGUARD Gold Certified:
The GREENGUARD Gold Certification standard includes health-based criteria for additional chemicals and also requires lower total VOC emissions levels to help ensure that products are acceptable for use in environments like schools and healthcare facilities. In addition to limiting emissions of more than 360 VOCs and total chemical emissions, GREENGUARD Gold Certified products must also comply with requirements of the state of California’s Department of Public Health (CDPH) “Standard Method for the Testing and Evaluation of Volatile Organic Chemical Emissions from Indoor Sources Using Environmental Chambers, Version 1.2 (2017)” (also known as California Section 01350). Office Furniture products that are GREENGUARD Gold Certified are also compliant with the BIFMA X7.1 standard and BIFMA e3 credits 7.6.1, 7.6.2, and 7.6.3.
Videos Hide Videos Show Videos
What Comes In Our Spray Foam Kits? | Air Seal Your Crawl Space | Crawl Space Encapsulation
You can purchase spray foam kits from our DIY Store! Get every...
Crawl Space Air Seal Insulation | 3 Vital Crawl Space Air Seals | DIY Air Sealing the Crawl Space
In this video, Michael talks about the three most crucial craw...