Product Description
Free Shipping to the Lower 48 States (7-10 Business Days)
- 1.5-inch Wide x 75-feet Long
- Black 2-sided
- Qty - 1 Roll
- Made in U.S.A
- Adheres best in 60°-78°F
- Do not store in areas above 78°F - adhesive can melt
- If product arrives hot, place in freezer for at least 30 min.
Foundation Butyl Tape DIY Description:
Crawl Space Ninja DIY Foundation Butyl Tape is a reinforced butyl tape coated on both sides with an aggressive rubber based adhesive system specifically designed to compete with Butyl Rubber in applications that
require very high tack, peel, and sealing properties.
Foundation Butyl Tape Applications:
Crawl Space Ninja DIY Foundation Butyl Tape provides excellent adhesion and sealing to a wide range of surfaces and conditions including: porous, low energy, cold, and damp surfaces.
- Great for field seaming and repair of polyethylene and polypropylene film/panel.
- Excellent adhesion to concrete walls, galvanized aluminum, plywood, oriented strand board, wafer-board, and pink foam insulation sheet.
- Sealing between glass, metal, wood and many plastics.
- Click Here to download specification sheet.
FAQ: How Much Foundation Butyl Tape Do I Need?
First you need to take a measurement to get the linear feet of your crawl space's perimeter. For example, if you have a crawl space that is 50 feet long and 20 feet wide (1000 square feet) we simply add the measurements of each wall to get your total perimeter linear feet. 50 feet + 20 feet + 50 feet + 20 feet = 140 total linear feet. That's how much butyl tape you'll need. Since each roll is 75 feet, you would need 2 rolls! This will meet your 140 feet requirement. You may also want to calculate pillars.
Product Videos
Videos Hide Videos Show Videos
Custom Field
Product Reviews
23 Reviews Hide Reviews Show Reviews
-
butyl tape
Great tape. Holds great. Sticks great to cinderblock.
-
Tape won't stick
Tape won't stick to Cement wall!
-
Sticks Nicely
We used a wire brush and Dollar Store LA's Totally Awesome Cleaning Vinegar to clean the poured concrete surface prior to applying the butyl tape. Other than areas of the concrete with rough surface, the butyl tape stuck tenaciously to the concrete. One must be careful to align the vapor barrier to its proper position prior to sticking it to the butyl tape; once the vapor barrier touches the tape, it is stuck. We used a Freeman PSSCP Pneumatic 3" Single Pin Concrete Nailer to drive Ramset 1" Powder Fastener Pins With Washers through the vapor barrier at the middle of the butyl tape at 16 inches on center, to make doubly sure the vapor barrier would not come adrift from the concrete.
-
Butyl tape
worked beautifully. Sure is sticky!
-
Butyl Tape
Works awesome! It stuck strong to an old dirty block wall and held up my poly just the way I imagined.
-
Tape
Was easy to use and made hanging of the plastic on the walls a breeze!
-
great
great product and works exactly as described.
-
Butyl tape
This is very sticky stuff, just be sure the surface you are applying it to is clean and dust free.
-
Foundation Butyl Tape
Excellent tape, works great but don't let it get stuck to the wrong part of the plastic because the tape is stronger than the 12 mil I am using so I had a couple of holes to patch... the joys of first time users.
